We are engaged in the manufacture of 7 full band dryer which has performance up to 1500 kg / h, depending on the product and moisture 13,50 m long x 900 mm range. Stainless steel and stainless steel drums - Netzband, is well maintained with two rotary mixers, filters, blowers, piping, valves, control cabinet. The band were drier during the dismantling and expertly marked according to the documentation can be mounted again. Upon request, the assembly made by us, as can an overhaul done by us. 7 complete set Belt Dryer, which has been used in a baby food factory in Germany, always understand quality - control Milk powder has been agglomerated in small pearl, capacity up to 1500 kg / h, and dried. 13.5 meters long, belt made from stainless steel 900 mm wide with internal agitator mixer with heating register (heat exchanger) by tribes heated up to 10 bar, approx. Up to 80 kW/h with blower, with filter, with pipes and valves Up to 80 kW / h with blower, with filters, with pipes and valves.

Offering high quality grain dryer and vegetable dryer, suitable for corn, rice, sorghum and rape seeds etc.

Although the common refrigeration dryers are excellent for providing lower cost 'dry' compressed air, they cannot achieve pressure dew points down below 3C because the water vapour in the compressed air would freeze, blocking pipes and damaging downstream equipment. To provide pressure points down to - 40C or lower, in that case an absorption dryer is the most effective solution. A self cleaning stainless steel wedge-shaped support screen ensureslower differential pressures.

Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used. The Rotary Dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical.

Dryer using hot air drying system, power of small, low power consumption, fast-drying, drying of water production in accordance with the size of the raw materials, power 4km.

1.      This machine is used for drying the paper after printing. It is composed by conveyor part and heating part. 2.      The speed of transfer and temperature are adjustable according to requirement. 3.      This machine adopt the high-pressure motor and multi-wing fan jetting drying structure which can make the solvent ink removed rapidly. 4.      Conveyor belt adopt imported belt, which endure high temperature, long- life service and steady. 5.      Covering device is pneumatic, which can be up and down freely and cleaning and maintenance are convenient.

From one effect to 7 effect falling film evaporator.With evaporation technology from Netherlands, Siemens control system and 30 years experience, we have made Taikang the international base of evaporators. The equipment covers the smallest area and is easy to operate. The liquid can be moderately evaporated with economical operation. The equipment is widely in the fields such as dairy products, beverages, starch sugar, fruit jam, chemical and biological pharmaceuticals, refined honey, Deep processing of Soybean, food additives, sewage treatment,etc.

1.      This machine is used for drying the glass after printing. It is composed by conveyor part, heating part, hot air cycling part, air cooling part and exhausting part. 2.      The speed of transfer and temperature are adjustable according to requirement. 3.      This machine adopt the high-pressure motor and multi-wing fan jetting drying structure which can make the solvent ink removed rapidly. 4.      Conveyor belt adopt imported belt, which endure high temperature, long- life service and steady. 5.  Covering device is pneumatic, which can be up and down freely and cleaning and maintenance are convenient.

dryer filter

Rate of evaporation: 25000Kgs/H; 24000Kgs/H; 30000Kgs/H.With evaporation technology from Netherlands, Siemens control system and 30 years experience, we have made Taikang the international base of evaporators. The equipment covers the smallest area and is easy to operate.The liquid can be moderately evaporated with economical operation.The equipment is widely in the fields such as dairy products, beverages, starch sugar, fruit jam, chemical and biological pharmaceuticals, refined honey, Deep processing of Soybean, food additives, sewage treatment,etc.

Diamond Equalizing is a perfect treatment system in that various operating steps can be applied by only one machine. The standard model of the diamond series performs as the basic for the Diamond Equalizing machine which is generally consists of 3 or more drying chambers. The equalizing frame consists of pin-chain entry unit and chain track system. The equalizing system that total length is 5.7 m comprises a conveyor chain mechanism of 4.9 m which provides gentle opening of 40 cm as width and overstretching of the fabric. The inlet unit consists of the spiral stainless steel openning double rollers which can be adjusted position, the centering system with open-width sensor and move-support and pin-chain entry feeding system. Neverthless, a dewatering-padder and mostly an impregnating padder is available with system. The fabric is directed via the centering device in to the pad-vessel(wetting out-through)for wetting, so it would be wet immediately before surface of squeezer rollers and

Offering vacuum dryer with following feature: FZG Grinding and Agitating Vacuum Dryer, a horizontal cylindrical vacuum unit, is equipped with the agitator which has the high speed grinding paddle in order to force blocks of materials formed during the drying process to dispersion, fully renew the surface of materials and guarantee water content of finished products uniformly.

SAHARA's T Series Heatless Regenerative air dryer is the most reliable dryer ever built. Since this unit requires neither heaters nor blowers, it is inherently more trouble-free than any heat-reactivated dryer. Upflow Drying/Packed Bed In the real world, air demand fluctuates. Sometimes compressors are turned off on Friday. Over the weekend, your air system loses pressure. Turn on the compressors Monday morning and the velocity through a dryer is high enough to pulverize the desiccant. Competitors tell you to slowly pressurize the system to avoid desiccant fluidization. Right. At SAHARA, we designed the T Series to operate in the real world. Packed desiccant beds allow the T to operate at 0 to 100% flow; full line pressure or no line pressure. You dont have a problem downstream with a T. Heat of Adsorption All dryer manufacturers make claims about dryer efficiency. Everyone talks about the esoteric theories of heat of adsorption, some even give you obscure formulae. In the real world,

Continuous hank dryer

* Configured for high volume OEM requirements * Offer a reliable, efficient, and economical alternative to pressure swing and refrigerant dryer technologies * Require no electricity thus lowering operating costs * Dewpoints as low as -40�F (-40�C) prevent freeze-ups * Explosion proof * Silent operation * No desiccant to change * Eliminates condensate discharge typical of refrigerant dryer technology

Direct heated gas-dryer- or electrical heated dryer with the leading technology

Roller body arrangement for steam circular straight tube with the secondary steam of the thermal insulation laminated structure, which greatly improve the efficiency of heat conduction 2.Into the steam tube rotary joint selection of advanced sealed to prevent gas leakage, water leakage 3. The use of insulation materials outside the cylinder to reduce the formation of condensed water; 4. Key components for high wear-resistant materials and stainless steel production, increased machine reliability and durability 5. The use of variable frequency motor drive, wide speed range, which can effectively control the stability of the time, to further enhance the effect of particle aging, better product quality 6.Adjust throttle settings to ensure that the finished product ≯ 11% moisture content 7. Production of large, low energy consumption, convenient operation and maintenance.; 8.Production

The Lambton Machinery Tower dryer design utilizes industry proven drying principles along with many unique features and the latest technology to provide the commercial user with a simple, reliable, fuel efficient grain drying system, without sacrificing grain quality. L-M Tower Dryers provide fast, efficient drying for large farm operations and commercial elevators. Large grain column holding capacities provide long retention times for high quality efficiently dried grain. 12" grain columns with grain turner to uniformly dry grain (with cleanout door). Large steeping area between heat and cool results in less stress to grain. Heat recovery approximately 28% of total heat section.

New type energy-saving rotary dryer uses new type combined lifting device. The structure of the dryer is novice and unique. It is adaptive to various kinds of coals, because of the high temperature fluidization bed, being able to use poor quality coal, gangue and coal dregs. It optimize three technical parameters of drying system: “coal, material, and air? greatly increasing the efficiency of the dryer, increasing output and reducing the energy consumption

Offering best quality, high performance filter dryers.

We offer high performance rotary dryer.

AIRTEK AIR DRYER (1ZZ1860) MODEL: SC1000 S/N:94-4139C 460V, 200 PSI 1050 SCFM YEAR: 1999.

This machine is applicable in pharmaceutical, chemical, food and light industries to dry granular

materials, especially big-sized granules. The sizes of granules can be from 100um to 6mm. Both the upper and lower parts of the machine's hopper adopt inflatable seal. Negative pressure is

produced in the cylinder by using a centrifugal blower. The cool air, from which dusts and micropartic les are removed by a filter, enters the air heat exchanger to be heated. Through the gas distributing plate in the hopper, the heated air makes the whole granule layer remain

in an ebullient state. The stirring paddle stir all big granules in the cylinder. Finnally, the moist air flow will be discharged through a device which lets moist air flow pass, but blocksblocks the dry granules and little quantity of fine powder produced due to impact.

Product: Electric Conveyor Dryer Category: Conveyor Dryers/Curing Machine Model: Hot Tek IR-12A Description: Our Hot Tek Dryers specially Design to provide maximum production .Digital Temperature control and installation of heavy duty chamber make it sure to provide best curing results for printed Garments and Specially Printed Denim ,within minimum energy consumption. Products Features Are: Conveyor Size: 12ft X 4ft (Teflon Mesh) Heat Chamber: 8ft X 4ft (Single) Electric Power: 6.5 KW Heating Method: IR (Infrared) Lamps Voltage: 440 Volts Temperature Control: Digital Monitor and Control Conveyor Speed: D.C Variable Motor/A.C Variable Motor *This Model is Without Air Circulation Blower. *Teflon Mesh Conveyor

Working Principle ZHG-series fully automatic dryersed to dry various fabrics.With the functions of automatic control and timer drying, the drum can run in clockwise and anticlockwise directions automatically.It will send out a signal automatically while finishing.It is easy for operator to watch the drying condition through the large window.With a slim and compact structure, it only needs lees space.

Over Refrigerant & Desiccant Dryers: * No electricity required - low operating costs. * No refrigerants or Freon - environmentally sound. * Low dewpoints to -40� F - prevent freeze-ups. * Explosion-proof. * No moving parts or motors. * Silent operation. * No desiccant to change.

Evaporation rate and heat-transfer efficiency is high under vacuum pressure and low temperature. Can reduce the boiling point of materials,more suitable for thermal sensitive raw materials in vacuum conditions. Main Features: 1) Material: stainless steel and/or carbon steel 2) Type: falling/climbing film evaporator 3) Evaporation area: 2.2 - 60M2 4) Evaporation rate(H2O): 140 - 4200 Kg/h 5) Evaporation pressure: 0.05 ~ 0.2MPa Various specifications available according to per customer's requirements.

Providing a precision engineered range of filter dryers. 03X
05X
08X
16X
30x

Free loops dryers are recommended for all those fabrics requiring a final soft touch and a regular dimensional shrinkage, in particular for silk, soft, delicate and traditional woven fabrics.

1. Apply to laboratory simulation workshops dyeing process, heat resin curing test was conducted, Obtain and verify dyes, auxiliaries and other prescription pharmaceutical and industrial conditions, test fabric's tough feeling, the degree of color dyes, color fastness and other important quality to get the right formation and organization model of the finished product. 2. The machine can be used as solid-color and the dryer of printing. 3. Made of import high quality stainless steel, have a comprehensive design with insulate fire and energy-saving. 4. Specially designed, tank structure, small size, operate convenient, without additional base
5. The hot blast circle automatically controls the electric heating system, the hot blast distribute equality, precise, stable.

The Sahara Exhaust Purge air dryers are simple and efficient. They are the safest and most trouble-free of any heat reactivated regenerative-type dryer. The Exhaust Purge (EP) is a twin tower dryer that delivers dry air with a -40F pressure dewpoint; a dewpoint lower than that required by the Instrument Society of America. Its conservative design was developed for optimal energy savings with roughly twice the amount of desiccant required to dry air at full design waterload. This assures you of years of superior performance before desiccant aging makes desiccant replacement necessary. Additionally, the optional Dewpoint Demand System optimizes the dryers energy-saving design, thereby significantly reducing operating costs. The Exhaust Purge design stresses safety and reliability. By using an external heater, the EP dryer eliminates the problems associated with internal heat-reactivated dryers. The externally mounted heater is not in contact with the desiccant, which increases desiccant

Offering programmable vacuum dryer with following features: - LCD vacuum degree window. - Suitable for drying thermo-sensitive material. - Shorter drying time for sample that does not dry easily. - Dual layer tempered glass door for clear observation. - Fully automatic electromagnetism controlled vacuum. - Minimum heating time 50% less than traditional vacuum oven.

1/  the hot air generator takes coal as fuel, heat air to a wanted temperature, the hot air flows through hot air duct to rotary dryer, spray tower, oven and so on.2/  the coal-fired hot air generator has such advantages as low operating cost, easy maintenance, simple operation.3/  the coal-fired heater can take the place of oil-fired &gas-fired hot air generator in many fields, and reduce the cost largely.

Inner heated fluid bed dryer is developed based on normal fluid bed dryer and indirect heated dryer. Immerse the heat exchanger in the material that is fluidized and dried. The heat required for de watering is provided by tube heat exchanger and fluidized hot air. The air velocity required for to dry the material is less. The main heat is provided by the heat exchanger inside, the hot air is mainly for fluidization of material, so the hot air velocity required is much less compare to normal fluid bed dryer, power consumption and heat lost with the tail gas are sharply reduced. Features: - Energy saving, low running cost. - The amount of drying air is less; the power consumption is low. -The drying capacity is high; the volume of equipment is small; the area occupied is less. - The operation flexibility is high; the operation of system is steady. - Adopt special air distributing board, so to avoid leakage of material, and it's good for discharging material of big particles. - Adopt two

Industrial dryers are amongst the equipments which have many applications in different industries and they are used for drying of different kind of powders & liquids. Dryers are classified into several types which include: Flash dryers, Drum dryer, Bundle dryer,* Applications: Starch and starch derivatives industry and Other Industries.

Application:A flash dryer is an important piece of equipment in the screen printing process.Feature:1.Full 500 X 600mm heat opening2.Adjustable height floor stand (from 300mm to 500mm) 3.adjust the switch on the back to make 3,6 or 9 lamps working as the same time 4.Attachment a fan, increase 20%-30% efficiency5.Quicker flash time and very even heating6.360 degree level swivel headParameter: lamp: 9 pcspower: 4.5 kwpower supply: 380V 50Hzdimension: 985*700*1000 mmnet weight: 32 kg

This type of dryers can be either mounted directly above the machine feed throat or seated on a floor stand, ideally suited to continuous drying of 12 to 800 kg/hr of non-hygroscopic plastic granules at maximum 150?C. This type of dryers possess a microprocessor control system which contains digital setting of drying temperature, 99-hr auto start-up timer and fault diagnosis functions.

Just like coating systems and winders dryers are core components of the complete production line. Competence and years of experience in this technological area are required to be able to offer and integrate sophisticated and reliable technological solutions. DRYTEC, a subsidiary company of the Kroenert Group, supplies drying and humidification systems. Drying Systems 1.Drying/curing with the convective dryers Highdry ◦Roller dryer - ROLLTEC ◦Air flotation dryer - FLOATEC ◦Suction dryer - CONTEC 2.Drying/curing of coatings with irradiation technology (IR or UV irradiation), as single systems or as systems combined with convective dryers. Here, the systems Highdry ◦RAYTEC IR ◦RAYTEC UV are suitable solutions. High flexibility combined with state-of-the-art technology are the basis for powerful systems at machine speeds of 2,000 m/min and working widths up to 3,300 mm.

Flash Dryer

Theory of Crystallization Drying: Select raw plastic materials with the special performance of imported short-wave,which can directly radiate the layer of raw materials, and temperature rises from the interior raw materials,quick heated moisture is instantly gasified,absorbed when the internal raw material transferred to the outer, and then discharged.It can get the best crystallization drying effect that raw materials needed in a short time. Best applicable for PET perform sheet material,dehumidified drying before deawing.

Model JZV Series High-efficiency Fluid Bed Dryer is used for drying with boiling method for granule which diameter range 0.1-6mm. It is widely used to dry rapidly the finished or semi-finished products in pharmaceutical, foodstuff, light manufacturing and chemical industries.

Rotary dryer mainly consist of rotary body, material retaining plate, driving device, supporting device, etc. Its principle of operation: the material retaining plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dried. Rotary dryer is used to dry slag, clay, limestone, etc. It is mainly used for cement, chemical, metallurgical, building materials industries. Its advantages are as follows: high drying capacity, smooth rotation, low energy consumption, easy operation, high output and so on.

MGT Muddy material rotary dryer is a kind of highly efficient, stable and reliable heating drying equipment, designed by TAIDA GROUP to dry materials of high moisture or strong stickness. It’s performance are better than tube bundle rotary dryer, blade rotary dryer. It’s features are big capacity, low energy cost, and high efficience. It’s applied in the materials like coal slurry, mud, filted gypsum, Muddy,high-moisture swell soil, electroplate mud and so on.

The Spray Dryer design and technology provides the powder producer with the ability to control the powder form through the drying process. The U.S. Machineries Spray Dryers are designed to produce properties such as particle size, bulk density, moisture content, solubility, dispensability etc. exactly as desired by the user. Every Spray Dryer consists of a feed pump, atomizer, heating unit, air distributor, drying chamber, and air-powder separation unit. The most important characteristic of Spray Dryer is its high speed for drying and that is because of the surface extraordinary increase in respect to the mass. This characteristic blocks any possible damages to the sensitive liquid while drying. This machine is being used in fields such as pharmaceutical, food, chemical, mineral. And day by day it is taking place in more industrial fields. Depending on different requests it is possible to use PLC control system, different sprays, and pneumatic hammer in order to shed

It is suitable to dry,cool,humidifying the powder,granular materials in such industries as chemical industry,pharmacy,food,etc. Features: 1. Fluidization is uniform and stability without dead-bed and blowing problems; Materials are dried and cooled evenly.2. Good adjustablity; the material thickness, resident time and amplitude can be adjusted properly.3. Less damages to material surface; it can be used to dry fragile materials.4. High machnical efficiency and thermal efficiency, stronger energy-saved ablity than normal drier.5. Clean contact with materials and can be continous production. Application: It is suitable to dry,cool and humidity the powder,granular materials in such industries as chemical industry,pharmacy,food,foodstuff and minerals and so on. For example: citric acid, gourmet powder, borax, amsulphate, combined fertilizer, silica,

* Standalone infra-red pre dryer for pre drying samples before using TFO / TFO S. * Control can be achieved by switching on and off individual heaters. * Chain drive with automatic sample release into tray at base. * Variable speed. .

Product: Screen Dryer Category: Screen Making Equipments Model: Screen Dryer Description: Hot Tek Screen Dryer (Hot Tek Screen Dryer available in Box and Cabinets Both Types according to Customer requirements.It is very useful product of screen making equipments.It will aid in the drying of the emulsion, which will provide consistent exposure times, strong stencils, proper drying and helps eliminate pin holes in your emulsion.This system offers both a convenient screen storage rack and a quick, dust free drying system. Products Features Are: 1.Size 3Ft x 2Ft x 6.5Ft 2.Max Screen Capacity 20 Screens.3 .Electric Heating Systems with Air circulation. 4.Digital Temperature and Time Control 5.Single Phase Electricity Supply.

Refrigerated Air Dryer for compressed air.

Introduced in 1982, the Black Flash has become the preferred flash/cure unit in the screen print industry. Consistent heat radiation over the entire element surface ensures every print is properly flashed or cured. And we sell a wide range of sizes, wattages, and voltages. Made to last, the Black Flash is built to be your all purpose dryer for many years.

The FASI CDH series of hot air dryers is the most effective way of drying plastic granules. Drying directly at the machine throat eliminates the possibility of contamination or re-absorption of moisture when transporting from a drying location to the machine hopper. The CDH series of hot air dryers is ideally suited to the continuous drying of plastic granules. Unlike conventional drying hoppers that blow hot air from the bottom causing inconsistent drying, the CDH series dries under the principle of "Hot Air Down-blowing" and "Cyclonic Air Exhausting" ensuring consistent results. All models offer rapid heating and accurate P.I.D. temperature control by incorporating as standard equipment an electronic temperature controller with thermocouple. An adjustable safety overheat thermostat to prevent overheating of the material is also fitted as standard. Standard Features ? Full stainless steel internal parts. ? Hopper lid prepared for easy mounting of hopper loader. ? Hopper cleaning door