We have with us a large assortment of premium quality High Viscosity Liquid Pressurized transfer can pump that comes to find utility in dispensing by simply applying high viscosity liquid within 5 gallon pail can. Our machine comes engineered for working at high viscosity materials of 10,000-600,000cps without bubbles mixing or materials loss.
SPECIFICATIONS Model PCP-20-10 Pump sending ratio 10:1 Volume per stroke(cc) 8 Applying viscosity 10,000-600,000cps Air consumption 80ml/min(max)

Developed in a capacity of 2.5 liter, this drainage system is ideal for cardiac and thoracic procedures. The readable graduation on this systems assures precise determination of drain volume.

Our company aims to design and supply good quality Vacuum Equipment to our national as well as international customers. The vacuum equipment designed by our expert professionals includes vacuum ejector, vacuum pump, vacuum filter, vacuum pad and vacuum holder. Our technicians work with utmost precision to design and provide cost-effective vacuum equipment to our clients.

Technical Specifications:
* Part: 11-72-7-553-056, 11727 553 056

Our machines make it possible to operate upon various sorts of quantity dispensing operation of Silicone cartridge without bubbles mixed using pressurized transfer pump. Convenient work with and no loss of high viscosity materials, minimizing working space and convenient installing and operation condition based on small size and light type design.


SPECIFICAITONS Model BSP-330S Air pressure Higher than 2kgf/cm2 Air consumption 80ml/min(max) Sending ratio 10:1 Max. dispensing pressure 50kgf/cm2

Technical Specifications:


* Part: 078 906 601m, 078 906 601 g
* W0133-1597198

Applications:

* Audi
* Skoda
* SEAT
* VW

Metal :

* DIN SPEC (G x 120MnCr13.2) steel casting
* Hi Manganess elbow
* Tension Strength : 85 kg/cm up
* Yielding Point : 45kg/cm up
* Percentage of Elongation 29kg/cm up

* Wlded on Collor : Single wall
* Steel : Harden Pipe 14 mm (Out Side)
* Liner : Hi Frequency Wave Heated
* Wlded On Collar : Double Wall

We are engaged in offering a wide gamut of Industrial Pumps that includes: - Stationary Trailer Pumps - Concrete Pumps * Features: * Durability * Longer functioning life * Abrasion resistance

Offering power steering pump, starter, fuel pump, air flow sensor, air flow meter, alternator and electrical fuel pump.

Submersible sewage pumps

with manometer and1m (40") connecting tube
ref 21-95-350

Type : Vacuum Pump/ Air Ejector
- Air Flow(m3/Min) : 10/ 20/ 30/ 40/ 50/ 60

* Excellent chemical compatibility.
* Fluid purity maintained.
* Low-pulsation flow.
* Adjustable occlusion with locking knob.
* Continuous-duty.
* Variable flow from 1.4 to 65 ml/min.
* 100 PSI (6.9-bar) pressure capability.
* 1/10-hp, 6-300 RPM continuous-duty drive.
* + 1% drive speed accuracy.

All correctly installed VDO fuel pumps will provide optimum flow and pressure under all operating conditions, thereby ensuring the best performance and economy throughout the expected life of the pump.

centrifugal and positive displacement pumps for handling a variety of liquids in many different applications

Ideal for wash bays, golf courses, and restaurant applications, this stainless-steel pressure washer offers a superior package design combined with a quiet operating system.

Compact, mechanically-sealed lubrication pumps for up to 13.7 usgpm (51.9 lpm) and 500 psi (34.5 bar). Applications: Lubrication, Fuel Transfer, Oil Burner Feed, Filtration

Problem: Severe deterioration of the town's sewer system has called for a comprehensive rehabilitation project that included permanent rehabilitation of 224 manholes, 6 pump stations as well as slip-lining of sewer lines, service lateral replacements, sewer line replacement and upgrades to lift stations.
Solution: The Town of La Grange contracted with a Poly-Triplex Certified Installer to complete the manhole and pump station portion of the project. The Poly-Triplex Liner System was used to completely seal off infiltration and provide an impervious water, chemical and sewer gas resistant liner to stop future deterioration.

FUEL PUMPS

Trolley Mounted Petrol / Diesel Unit
Shown with heavy duty wheels. Can be used for surface cleaning of filter screens, walls, floors and drains. Useful in rural areas where no electricity is available.

liquid metronics has been providing quality products and service to the water treatment industry worldwide for over 20 years. lmi introduced the first full line of electronic metering pumps and accessories. Lmi’s product line extends from low-cost metering pumps for domestic potable water treatment to highly sophisticated custom designs for specific customer applications.
today, lmi continues to shape the future of the industry by offering the next generation of our trademark yellow and black metering pumps, the liquipro™ series. This series of electronic metering pumps offers simple installation and maintenance with its unique cartridge valve design, as well as quick and easy "hands free" priming three and four function valves. Utilizing superior designs and industry experience, lmi offers water treatment professionals the quality and reliability you have come to expect.

Submersible motor pump For water supply, irrigation and watering, pressure boosting, reducing the groundwater level and industrial applications. For pumping water without long fibre and abrasive particles from boreholes with a minimum diameter of 6, 8 or 10" (DN 150, 200 or 300) and also an immersion depth depending on type of 220 to 350 m.

We chose a High volume pump with large steel gears so we could get maximum scavenge you should still pull vacuum in the crankcase at 20 psi of boost with this setup.
There are 4 stages 1 stage to pump oil, 3 stages to scavenge, 2 from the pan, one from the cylinder head to clear all the oil that gets stuck in the head from running high rpm, and fills your puke tank (you fast guys know what we’re talking about) The DSM block does not have enough drains, now we have -12 vacuum pump working on that nonstop. We selected this pump to work both in road race and in drag race, the only difference will be tank size.

BJM 2” Electric submersible pump
* Standard style
* Trash style
* We also carry float switches & hoses for your pump-Call for details.

the six shooter is an industrial quality, high volume, hand operated rotary pump designed specifically for model use. It features a new compound silicone pumping element for superior fuel resistance and resistance to splitting - no seals or valves to leak or wear out. The unit is self priming and will stop and reverse almost instantly. six shooters are designed to last longer and be more reliable than electric fuel pumps because there aren't any broken battery wires, dead batteries or stripped gears to keep you grounded.

Positive displacement pump plunger or diaphragm type, for metering and injecting all fluids.
Outputs up to 448 L/H
Pressures up to 250 bar
Motor rating : 0,55 kW

Introducing the NEW Sequence® 4000. The new expansive design will meet today’s increased market demand for performance on all levels. Every Sequence® 4000 model is supplied complete with 2” FNPT and buttress thread ports and unions for ease of use. 3 year limited warranty. Made in USA. Supplied with an 8-foot, 115V cordset.
Model 3600SEQ20 4800SEQ17 5600SEQ18 6900SEQ21 8800SEQ22 INLET 2" 2" 2" 2" 2" DISCHARGE 2"

* Oil Well Pump


* 2-100 HP
* 1200 RPM
* TEFC Enclosures

KMT Waterjet's variety of Ultrahigh Pressure water jet pumps ranging from 15hp to 200hp are used worldwide in the automotive, aerospace, textile, stone, plastic, rubber and food industries...and much more!
This example highlights the latest in waterjet pump technology with the Next Generation in water jet pumps, the KMT Waterjet Streamline™ PRO 90,000psi pump. Increase speed and improve productivity with the Streamline™ Pro!

Kool-cel model pdr systems are available in 1' increments for flexible, easy installation. Pads are constructed of rigid cellulose cooling cells in either 4" or 6" thickness.

The series of YB hydraulic pumps with ceramic pistons are mainly composed of oil hydraulic system, the cast cavity, oil jars and alumina ceramic pistons which are high wear-resistant. The pump body can be made of cast iron or stainless materials according to the different conditions in which the pumps are used. YB hydraulic pumps are divided into three types. They are high pressure pumps, low pressure and large flow volume pumps, and flow-variable pumps .The high pressure pumps are suitable for pumping slurry to a long distance or a high place(It can send slurry to 20 meters height);The low pressure and large flow volume pumps are normally used to send and transport sludge in large volume; The flow-variable pumps are normally used with filter press or filtrators. This kind of pumps can automatically vary the flow and pressure according to the filtration density. Features: *Hydrolic driving,double cavity working,large flow volume. *High stable running,good reliable operation,long

Covering a wide range of industries, across a multitude of applications, Transflexit offer an impressive range of hydraulic pumps, valves and motors, including an extensive range of ancillary equipment, refurbishment, repairs and system design/installation and commissioning. Providing both on and off site services, in not only the general engineering field, but also specialist areas such as on board and off shore marine, aerospace and petrochemicals mining and quarrying. Transflexit's customer service packages may also be tailored individually to suit each customer's specific requirements.

Heavy duty process pumps

Casella cel is one of the worlds leading integrated environmental solution companies. The group encompasses and extensive range of products and services providing environmental consultancy, measurement, analytical and remediation activities.
the new apex range of personal air sampling pumps has been developed to provide air sampling capabilities suitable for a wide range of applications including solvent fumes, asbestos clearance and personal sampling of dusts. Although this hand held device weights in under 500 gms it is fabricated to the must demanding specifications. Precision plastic engineering and injection molding of parts create a world leading product in both design and performance.

Fully redundant factory assembled vacuum center consists of one frame having two 30 gallon T304 stainless steel waste collection tanks bolted to second frame having two 3 HP recirculating water sealed liquid ring vacuum pumps and a PLC driven automatic control panel.
Features
* Fully Redundant & Compact Design: 65-1/2”[165cm] Long x 33”[84cm] Wide x 6’-8”[2m] Tall
* System Weights
* Dry: 750lbs [350kg]
* Wet: 1450lbs [650kg]

* Dual 30 gallon T304 stainless steel waste collection tanks each have a 2” pipe size top waste inlet connection and 3” swing check waste outlet connection.

The construction of a pattern generated by traditional methods can take upwards of 4 to 5 weeks to produce. A prototype constructed by 3D Printing can be in the customer's hands in a matter of hours. Before Z-Corporation Z402TM prototype The challenge was to make quality castings from patterns made with synthetic materials.
A leading manufacturer in September 1999, invited Acme Castings to research and develop several castings made from Z Corporation prototypes. Our first attempt, a 120 pound casting, was a mild success and shed light on how we needed to refine the process. Our second attempt was triumphant.

Passed iso9001: 2000 quality system certification in may 2002
possesses modernized workshop and equipments
can provide competitive price and reliable service
a trustworthy oem of german deutz products

Spray Pump

The sealless Needham pumps are the latest addition to our range of products. The pumps are designed to be maintenance free. The design excludes linear seals which are the most common item to wear in high pressure epoxy resin and paint pumping. Our pumps are self priming and are placed directly into the resin holding tanks. We have tested the pumps at our factory for 1,100,000 cycles (100,000 Litres) at an average of 2,500PSI (150 Bar) on Geopox 014 Hardener without the need for any maintenance over the full duration of the test. The Needham pump is designed to work in conjunction with ouR 1 FLOW METER and NEEDHAM PUMPS to give maximum accuracy and reliability.

Vane pump.

up to 900 m3/hr and to 12 bar head
marathon pumps to 16 bar head
the pumps for everything that flows.
vogelsang rotary lobe pumps have already stood their test in industrial & domestic waste disposal plants for a long time. They move anything that is meant to flow, free of blockage & without breakdowns even in extreme situations.
advantages
high efficiency - self priming up to 8 m npsh compact modular construction - insensitive to dry running - optimised sealing system with seal chamber - pulsation free flows - repair friendly pumping forward / reverse.
applications
sewage treatment plants. - waste disposal tankers - abattoirs - sugar mills - milk processing - fish processing - potato & starch factories - beverage industry - fruit & vegetables - well drilling - shipbuilding - chemical industry - construction - paper - recycling

PRESSRE RATIO: 1:1
TRANSMITTING CAPACITY: 5L/min(0.4kg/cm) 7.5L/min(1kg/cm) 10.5L/min(2kg/cm)
USED AIR PRESSURE: 1~5kg/cm
MAX. PAINTING PRESSURE: 5kg/cm
MAX. PUMP SPEED: 160times/min(5kg/cm)
MIN. PUMP SPEED: 80times/min(0.4kg/cm)

Potable water constitutes vital element above ground. We are all depend from the this and its lack leads to problems that are related with our health. On the contrary, its existence in satisfactory quantities constitutes element of prosperity for each population.

Indicatively, a recent UN report states the following :
* 1,1 billion people in the 3rd world countries have access only to water which is not subjected to industrial treatment.
* The above number will be increased dramatically the following years and will reach 2.3 billions untill year 2025.
* Greece is found in the middle of a table in which appeared the countries that are in danger for lack of potable water after the year 2025. The prospects of our country are still more ominous after the that year.

Here is where Palaplast s.a. comes. With robotic systems and with an un-matching industrial background, is constantly produces pipes and fittings which

With variable speed control • • • For use in the small-size ponds, garden wells, pond statues and spring stones in the outdoor and indoor range • • • Very low wear, silent operation owing to a rotor with ceramic shaft and bearings, therefore also suitable for ponds with seawater • • • With VORTEX free-running wheel for contaminated water up to 2 mm grain size

The pumps are new style environment-protect products developed from the typical submersible pumps. Unique automatic stirring device stir the sewage and solid articles float up to reduce the chances for jamming as well as improve the drainage capacity.
Performance range:
Capacity: 7~11000m3/h
Head: 5~60m

Size 206 x 206 x 86cm
Seating 6/7
Pumps 1 x 2 speed 3.6 hp
Total Jets 39 Chrome
Circulation Pumps No
Air Blower Yes
Ozone Yes
Total Pumps 3
Total Horsepower 4.6 HP
Electrical Req. 20 amp 240v 50hz
Underwater Light Yes (1 White)

V pumps and round pumps are both used for sludge and viscous materials, depending on application and preference.

Grease Pneumatic Pump

Ni-Hard casting casing, back-liner and impeller (hardness: min. 600 Brinell).
High rotational speed (up to 3000 rpm).
Easy replacement of the parts.
The clearance between impeller, casing and back-liner is adjusted by means of a screw.
Designed to work for 24h/day..
Easy maintenance and supply of spare parts

The WalkMed 350VL is a continuous infusion pump with the added features of total volume limit tracking and patient lockout capability. This pump is ideal for chemotherapy infusion. As with all of Walkmed's ambulatory pumps, the WM 350VL is both FDA approved and CE certified.