Machine IntroductionThis machine can make PP/PA/PE/PVC single/double wall corrugated pipe.

Our EPE pearl cotton foaming machine is the equipment that has a big L/D ratio and extrudes foam in single-grade. It uses the LDPE resin as the raw material. During the extruding period, the anti-shrinking agents and the foaming agents are injected with high pressure. After the plasticization and mixing by the screw, the material is extruded out from die head. With cooled, the material is shaped and becomes the foam products.

Adopting advanced design technology, combining advanced international extrusion resource on software and hardware, Reasonable match of the master machine and auxiliary, super property, fine appearance, easy operation, exhibiting main technology and style of current plastic profile extrusion production line from whole equipment , unit to components. Representing leading level on investment economy, advanced technology and easy operation.

We are engaged in the production of mattress foaming machine which is suitable for foam mattress with or without spring core, latex mattress with or without spring core's covering. Making the mattress covering easier and more efficient. Some of the specifications of this product are:

Complete line for pipe forming starting from a bar. Particularly designed for the camping applications. Our range of tube forming machines are simple, easy to operate and low in maintenance

This product line is used in pelleting or repelletizing the PP, PE, PS material after blending with pigment, as well as in turning the power material into pellet.

Control system adopts one of most advanced plastic extrusion machinery control system -PCC. It effects much higher quality extrusion:

We manufacture Pvc cutting machine which is used for 45 ~90 ~ -45 cutting processing of aluminum and PVC profile with single or double saw heads. it features high efficiency and flexible operation and is the necessary equipment for aluminum and PVC windows and doors. Technical Parameter :

We are engaged in providing single screw extruder, conical twin screw extruder, etc. Single screw extruders are the most common type of screw extruder. Single screw extruders use a single screw in combination with a cylinder or barrel for providing the mixing and conveyance through the extruder die plate at the end other end of the extruder to form the final product shape. There a numerous combination of screws and barrels to provide the necessary mixing, texturing and kneading of the product to make it suitable for shaping through a die plate and sized to a required length. Single screw extruder has the following features:

The screw and another consisting parts are designed respectively against the features of different material such as PP, PE, PS, ABS, PA, PVC, PC, POM, PET, PMMA, etc. They are suitable for the purpose of material color blending, high torque design enables speed reducer to work stably without noise. Hardness treatment features the screw and high production and barrel with good tear and wear resistance, good compounding effect. Air exhausted system or verified hole can get rid of water and waste gas out of the material. This enables more stable extrusion and more solid pellet, so the super quality of product is guaranteed. Some of the specifications are given below:

Offer to sell plastic extrusion machines, profile extrusion line, single screw extruder, conical twin screw extruder and pvc aluminium composite extrusion line.

We can manufacture pe twin-pipe production line, pe film washing line, pvc sheet production line: offering single screw extruder, pe pipe production line, pe twin-pipe production line, pe film washing line and pvc sheet production line.

Offering pvc pipe production line, pvc wave sheet extrusion line, plastic pipes, wood plastic compound profiles extrusion line and pvc sheet production line.

Offering various types of plastic extrusion machines such as aluminium composite extrusion line, abs pipe extrusion line, profile extrusion line, pvc pipe belling machine, twin screw extruder, conical screw extruder, plastic-wood mixture profile, window extrusion line, etc.

Offer to sell processing machine, pvc window processing machine, pvc door processing machines, pvc profile extrusion line and pvc lock hole processing machine.

Offering pvc window and door processing machines such as welding machinery, cutting saw, milling machinery, combining machinery, sealed insulating glass machinery, pvc extruder, four-corner plastic welding machine etc.

We are offering diversified range of plastic machinery like: - Conical Twin-Screw Extruder - Single Screw Extruder - PVC Wave Sheet Extrusion Line - PVC Pipe Production Line - PP & PE Film Washing Line - PVC Door & Windows Profiles Production Line - Single And Double Wall Corrugated Pipe Extrusion Line - PP, PE And PVC Plastic Extruding Sheet Production Line - PVC Sheet Production Line - Wood Plastic Compound Profiles Extrusion Line - PE And PP-R Pipe Production Line * Features: Very durable and reliable, available in various specifications, made up of best grades of materials, better efficiency, technically advanced, requires less maintenance, easy to operate, rust proof, corrosion resistant, ensures trouble free performance, sturdy and robust, cost effective. * Customization: Deliver customized products. * Packaging: We use superior quality packaging materials to pack the products for safe delivery. * Delivery: Immediate. * Clients: Spread worldwide.

Offer to sell pvc window and door processing machines such as welding machinery, cutting saw, milling machinery, combining machinery, sealed insulating glass machinery, pvc extruder, four-corner plastic welding machine etc.

Steady PPR aluminum production line¿FExtrusion machine:The brand speed control system,                   barrier-type polarization mixing PP-R special screw, barrel slotted. Sizing parts:the use of vacuum suction setting and circulating water cooling, stainless steel plate production. Traction parts:the use of pneumatic clamping, the brand frequency control, traction and stability can be realized pipe. Forming part:forming a perfect and complex process, to ensure that a reasonable pipe together. Automatic Control:The Japanese Mitsubishi flurried C programmable computer control, can be realized out of the amount of traction, composite forming, cutting the process control, to ensure that the entire production line (PLD) closed-loop

The series of mixer is suitable for various plastic granule mixing and repainting. The whole machine has compact structure, beautiful appearance uniform mixing, easy clearing and safety. Application and Features: 1.  Ideal equipment for producing moulding material and pipe material, used in various plastics material composing, mixing, drying, bepainting, CaCO3 activation and other crafts. 2.  Seal equipment for main shaft received national patent. 3. Heat mixing has self-friction or electric heating and steam heating functions. 4.  The lid adopts double-way sealing. Cold mixing also adopts arc lid against distortion. 5. All the oars have passed static balance and dynamic equilibrium experiments. Electric control all use the name brand parts.

Plastic Injection Machine

Plastic Crunching Mach

Offering a wide range of thermoforming machine. Characteristic

The machine integrates of electricity and optics, adopts the technology like: PC auto controlling, transducer regulating, the piece of material heated up by temperature, molding by air-press to cutting the finished product, and the numbers of the products can input to the machine. The flow is in a high automatic fuction. It can also configure the PLC computer control. (By the request of client). Characteristic

It is used for molding the plastic material as BOPS, HIPS, PS, PVC, PET and so on, which is widely used for the mini type soup spoon, the cover of the dish such as the salver of medicine and coffee, the bottleneck of Coca-cola. . . . . . Max Forming Area 310* 150mm

Max Forming Depth 30mm

Max Diameter of Piece 710mm

320* 0. 1-1mm

Air Pressure 0. 5Mpa

Punching Frequency 500-1000 (Time/hour)

Tatal Power of Electic Source 380V 50Hz 5. 5Kw

Weight 1500Kg

Dimensions 2800* 850* 1900mm

Offering a wide range of PVC compounding mixers.

Calming force from the 420 KN~2680 KNs(inject capacity from 40-700 grams).

We have number of used toyo plastic injection mold machines. All are in good working condition and are available for inspection. available toyo machines: toyo TI50G2 (1994) 5-unit toyo TI80G2 (1994) 3-unit toyo SI100 (2000) 1-unit total of 9-units available. The machines will be sold in one lot. We also have number of other used machines.

Plastic drying machine

Vacuum Extruding Machine  is our the patent product. Upper and lower stage use one electric motor with characteristic of compact structure,out view novelty,energy saving and high efficiency,high extruding pressure,wide practicability and low investment.This machine is the ideal equipment of technological reform for middle and small sized enterprises. Type: JKRL35/35 Production capacity pcs/h: 7000-9000  Power KW: Y6-75 Rotation speed of main shaft r/m: 37 Dimension mm: 4600X1500x1550        

Single Screw Extruder

1. Drived by cycloid pin gear reducer, working smoothly and making low nose. 2. Elaborate agitator paddle for efficiently threshing, diffusion and convection, equally mixing. 3. Trapezoidal touchdown base for low barycenter and smoothly. 4. Stainless steel barrel and agitator paddle, smooth and good appearance.

Professional plastic machinery producer in China, ChangDa Industry Co .Ltd .Specialize in plastic extrusion technology over 10 years. We supply PVC PP PE pipe /tube extrusion line and PP PE ABS PC PS and PVC sheet extrusion line etc, with competitive prize and good quality.

Hard Candy Extruder

PVC pipe extrusion line is applicable to produce water pipe and drain pipe for agriculture and constrction, underground installation pipe for wire and cable. as well as various kind of diameter and wall thickness pipes. the line could be provided by conical(parallel option) twin screw extruder,vacuum sizing tank,haul-off,cutter,stacker etc. Adopting vacuum calibrating and spray cooling baths, accurate calibration, fast cooling, the baths are made of stainless steel. Adopting two caterpillars haul-off unit with speed adjusted by inverters. Concentrate control, high automation, easy operating plastic pipe production line- plastic pipe machinery- plastic pipe machine- plastic line-plastic extrusion line-plastic production line-plastic machine- pipe machine-

# EFFECTIVE ENERGY SAVING: In regard to power consumption, Servo E series is 40% cost less than installation of variable displacement pump, as well as 60% cost less than fixed displacement pump by setting various injection terms. # BETTER ACCURACY: Clamping, injection, holding and charging are well controlled by closed-loop circuit. The command of pressure and flow give instant feedback from controller to stabilize machine functions. Linearity and hysteresis of pressure and flow are below 1% that will substantially improve the precision of finished articles. # FASTER RESPONSE: The response time for pressure and flow is under 0.1 second. While high pressure or fast speed is performing, servo motor merely provides necessary rotation to reduce energy waste of idle running. # HIGHER EFFICIENCY: No heat generation of hydraulic oil resulting from relief valves of fixed displacement pump and drain of variable displacement pump; hence, less volume of cooling water is required. The capacity of

SJSZ65 Twin Screw Extruder with mould head Diameter of screw: 65mm Barrel heating: 4 zones Mould head heating: 4 zones Motor power: 37KW One feeding screw Feeding hopper.

1) Change strainer Without need to stop running of double working positions 2) Belgium VERBRUGGEN oil cooling type automatic die head ABC distributor 3) Germany HAHL casting film roller and cooling roller 4) America NDC infrared thickness gauge 5) Denmark VETAPHONE corona machine 6) Full automatic coiler of double working positions 7) Hydraulic mould unloading wagon 8) Electric shaft extractor 9) Can regulate coiling tension through closed loop multiple stage tension taper can be set  

plastic processing machinery(mhl at tzkeli dot com dot cn) including two series:one stage injection blow molding machine and double station extrusion blow molding machine for max 50 liter single layer,PP,PE,PC,PS,BAREX,ABS,PVC material bottle in food,pharmaceutical and cosmetic packing field.

Offering high performance plastic processing machinery.

Its extruder, cylinder and screw rods are made of quality alloy steel that have been nitrixed and processed in a precision way.Hence it is sound in hardness, durable in corrosion resistance. The specially-designed screw is of sornd quality in plasticixing, which helps increase the production capacity. It is applied to blowing the plastic films like low density polytene(LDPE), high density polythene (HDPE)and linear low density polyted (LLDPE), It is widely applied to producing the packing bags for foodstuff, clothing, rubbish bag and vest ones.

Plastic sheet extruder machine                        Adopt 38CRMOALA high quality material with nitrogen treatment for the scrw ,barrrel ,module head and so on, so there parts can be used with wear and corrosive resistance .   With larger diameter for screw ,guarantee the main performance of sheet with good plasticizing.    For die head ,adopt advanced electric or hydraulic exchanging device for filtering net, so the operation seems to be simplified   this series extruder is composed of 6parts,extruder part ,filter part,die-head part,three rollers part,and traction part, rewinding part. extruder part :1set hopper :i set output: 135kg/h screw dia: 110mm L/D:32:1 Screw &barrel material: 38CRMOALA after nitrogen treatment with optimum hardness, strong corrosion resistance and long use

We offers you high performance die-casting machine.

As our customer your plastic injection mouldings will be manufactured using the most cost effective production methods. plastic injection moulding machine An extensive range of modern injection moulding machines means that most custom moulding requirements can be met. Rutland Plastics has the capability to produce plastic mouldings up to 38 kgs in weight and has particular expertise in thick sections, in excess of 100mm in some cases. Rutland Plastics also offers gas assisted injection moulding a relatively new technology offering opportunities to reduce costs and improve appearance of finished products. custom moulding at Rutland Plastics Producing custom mouldings for a wide range of industries has resulted in injection mouldings being manufactured in a wide variety of thermoplastic materials, prime or recycled/reprocessed, filled with glass, talc, etc. and unfilled. In addition materials can contain additives such as flame retardants and anti-microbials. Insert and outsert moulding

As a manufacturer specialized in plastic machinery, Cangzhou Sanqing Industry and Trade Co., Ltd. Is located in Xinhua Economic and Tecnological Development Zone, and covers an area of more than 100,000 square meters. In a beautiful environment, Sanqing owns modern workshops and a advanced machining center, SQ series of rotary blow molding machines, the first of its kind in China, are researched and developed by Sanqing, the owner of patents of the machine which can be used make hollow products with the use of PP or PE as raw materials. In addition, high-capacity reciprocating machine and PET blowing machine are also among the company’s product list. As an ISO9001 and CE certified manufacturer, Sanqing makes high-quality and easy-to-operate machines. Thanks to the high quality and first-rate service, its products have been widely used in many brand-name enterprises, such as Wahaha, Prince’s Milk, Xiaoyangren Milk, Harbin Pharmaceutical Group, and exported to Philippines,

Offering plastic injection moulding machine.

Offering plastic film extrusion machine: 1. Main parts: two extrusion parts, two electrical control parts, two aluminum film unwinding units, forming part and winding part. 2. Be able to produce five layers air bubble film. 3. Same natures with air bubble film machine, this machine can produce two or three layers air bubble film, can laminate the bubble film with aluminum film, brown paper and other with PE thin film into five layers laminated films with special use. 4. Through twice laminated, it can produce 7 layers air bubble aluminum film and 5 layers air bubble film. 5. Adopting Japanese "Nano"technology and high density, anti high temperature silica rubber roller to laminate film, the film will not stick to the rubber roller, pressing film smoothly, good laminated result to the brown paper and aluminum film. 6. Be able to manufacture various specifications of bubble between Dia 6mm-30mm and forming mould with

Dual-stage discharge-type plastic particle-out extruding machine design to T shaped or parallel-shaped structure, which is widely applicable to various plastic such as LDPE, HDPE, PP, PS and ABS etc, the design include air discharge unit so as to discharge the gas created after material was heated, such that particle will be more full, durable and smooth etc, mold shall be designed with hydraulic elevation fast-replacing filtering mesh(without any shutdown while operation), featuring more great improvement for productivity. Feature: 1. The main engine, the auxiliary engine, pelletizer to use the import frequency electrical machine. 2. Screw rod and feed cylinder are made by stainless steel. 3. The speed reducer which is special used to extruding machine. 4. Automatic change for net with hydraulic. 5. Controller uses the import component. 6. The pelletizer used alloy steel cutter.

Offering plastic recycling machine: This kind of machine is adopted for recycling every kind of plastic, such as HDPE, LDPE, PP etc. The plastic are usually from industrial and daily-used products, such as plastic film, knitting bags, convenient bags, beverage bottles, furniture and so on.

Technical parameter:Die locking force (KN) 1600Size of moving platen(mm) 700X700Diameter of tie bar (mm) 80Inner space between the bars(HV) (mm) 440X440Die thickness(min-max) (mm) 250-500Die stroke (mm) 350Ejection stroke (mm) 80Ejection Force (KN) 100Injection force (min-max) (KN) 102-200Diameter of shot shot sleeve (mm) 40, 50, 60Eceentric position of shot sleeve (mm) 0-140Dosage of fluid metal per shot(AL) (kg) 1.8Projecting area of casting(min-max) (cm2) 105-415Injecting pressure(min-max) (Mpa) 36-143 Injecting stroke (mm) 340Injecting speed (m/s) 7Pressure build up time (ms) <30 Dry cycle (sec) 7 Pipe line pressure (Mpa) 12Motor power (Kw) 11Machine weight (Kg) 5500Overall dimensions (LXWXH) (mm)

Offering film blowing machine having following features: 1. Material suitable: HDPE, LDPE, LIDPE. 2. Film width(mm): 1300. 3. Film thickness(mm): 0. 008-0. 15. 4. Screw diameter(mm): 65.

A precision engineered range of PVC and alumınıum processing machinery.