IndiaMART.com
or Post Buy Requirement

Top
Displaying products of 353 Suppliers

Calibration Equipment from India



  • Universal Calibrators
  • Universal Calibrators

    Nunes offer truly portable and highly reliable Universal Calibrators which can be used for the calibration of many types of Process Control Instruments which accept mV, mA and Resistance inputs. The calibrator is designed to suit instrument lab application as well as for field calibration. This can be used as better tool for fault finding and confirmation of instrument/ sensor reliability. Hence extremely useful for commissioning activity, quality assurance and trouble shooting. The more...

    9yr Nunes Instruments, Coimbatore

    No. 789/1109, Avinashi Road, Opposite Regional Passport Office ,
    Coimbatore - 641018, Tamil Nadu, India

    Send Enquiry

    8377801418 

  • Three Phase Power Energy Meter Calibrator
  • Three Phase Power Energy Meter Calibrator

    Combining outstanding quality and value, our organization is offering a qualitative range of Three Phase Energy Meter Calibrator. Our experienced professionals manufacture these calibrators in accordance with the international quality standards. Further, to ensure that clients receive only defect-free products, our quality controllers carefully test the entire range on various pre-defined parameters.
    Features:
    * With programmable timer more...

    9yr Zeal Services, Pune

    No. 13, Konark Udyog, Off Karve Road, Near Satyam Industrial East, Behind Rescon Factory ,
    Pune - 411038, Maharashtra, India

    Send Enquiry

    8376805920 

  • Portable Universal Calibrator
  • Portable Universal Calibrator

    Features :
    * Hand Held, Battery Operated, Mains Operated
    * 4.5 Digit LCD Indication
    * mV / mA Sink & Source
    * PT-100 ( RTD ) Simulator
    * Higher Accuracy, Stability, Noice Immunity
    * Calibrated On Certified Millimeters With National Traceability
    * Free Calibration Check Facility FOr FOur Year
    * Gauranteed Certification From Institution Like ETDC, ETRL, IDEMI, For Specified Accuracy
    more...

    5yr Shri Instruments, Pune

    No. 12 B, 1st Floor, 111, General Block, Behind Redix Dia, Landewadi, Bhosari ,
    Pune - 411026, Maharashtra, India

    Send Enquiry

    8376805878 

  • Push-Button Calibration
  • Push-Button Calibration

    Features:
    * Push-button calibration
    * Calibration buttons are neatly tucked away in the battery compartment to avoid unnecessary tampering
    more...

    8yr Sunshine Instruments, Coimbatore

    P.B. No. 3910, No. 83, Chinny's Chamber, Dr. Nanjappa Road Near Sony Service Center,
    Coimbatore - 641018, Tamil Nadu, India

    Send Enquiry

    8588848410 

  • Calibration Bath
  • Calibration Bath

    Calibration Bath - We are one of the leading exporters for Analytical Instruments and Analytical Testing Machines. We offers full line of Analytical Laboratory Tender Products. Analytical Equipments as per technical specification and tender requirements for labs, institutions & universities

    11yr Naugra Export, Ambala

    No. 6148/6, Guru Nanak Marg ,
    Ambala - 133001, Haryana, India

    Send Enquiry

    9899450619 

  • Sound Calibration SC-942
  • Sound Calibration SC-942

    Two Point Sound Calibrator Lutron SC-942
    Features: Useful tool to calibrate the Sound Level meter precisely.Frequency : 1000 Hz ± 5 %.Sound Pressure Level : 94 dB and 114 dB. Suitable Microphone Type : 0.5 inch or 1 inch microphone.Power : 2 PCs 006P DC 9V batteries
    more...

    7yr Swastik Scientific Company, Mumbai

    133, Gopal Niwas, Room No. 2, 2nd Floor Princess Street,
    Mumbai - 400002, Maharashtra, India

    Send Enquiry

    8447526237 

  • Strain Gauge Calibration Apparatus
  • Strain Gauge Calibration Apparatus

    Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Strain Gauge Calibration Apparatus
    Technical Description
    In a straight forward manner strain gauges provide reliable information on the distribution, direction and magnitude of mechanical deformation in components under load. Sufficient knowledge of this measuring technology is vital in mechanical engineering. This calibration device makes it possible for the user to become familiar with the key more...

    8yr Advanced Technocracy Inc., Ambala

    Atico House, No. 5309, Grain Market, Near B. D. Senior Secondary School ,
    Ambala - 133001, Haryana, India

    Send Enquiry

    8373903563 

  • Motorized Calibration
  • Motorized Calibration

    We are an emerging brand when it comes to supplying the supreme quality Motorized Calibration. This equipment is manufactured with the help of high grade raw materials which are rigorously tested for accurate and error free use. We provide our customers with a wide range of options to choose from.
    Features:
    * Accurately tested
    * Low response time
    * Noiseless performance
    more...

    12yr Contech Instruments Ltd, Mumbai

    No. 301, Punit Industrial Premises Turbhe Naka,
    Mumbai - 400705, Maharashtra, India

    Send Enquiry

    8376808314 

  • Magnehelic Gauge Calibration
  • Magnehelic Gauge Calibration

    Increasing quality consciousness amongst clients and the requirement of compliance to regulatory bodies has made equipment calibration more important. The Magnehelic Gauge Calibration play vital role in the safety and integrity of clean rooms. It is important to ensure that parameters of bio-safety cabinet air flow and clean room pressurization is monitored and controlled with accuracy. Our Magnehelic Gauge Calibration service is offered on-site using high accuracy and calibration more...

    12yr Aero Mech Equipments Private Limited, Chennai

    No. 3/1760, Srisudharsan Flat, Bell Nagar, Kundrathur Road, Porur ,
    Chennai - 600116, Tamil Nadu, India

    Send Enquiry

    8447572926 

  • Motorized Calibration
  • Motorized Calibration

    Fully automatic calibration accomplished by a smooth noiseless motor driven standard weight inside the balance eliminating weight maintenance. Accurately machined stainless steel standard weight is used for the purpose. Any tolerance in the weight machining is corrected through software. Balance can be programmed to initiate the motorized calibration process every time when it is switched ON, change in the ambient temperature, at a preset time to recalibrate the balance.

    12yr M/s. Contech Instruments Ltd., Mumbai

    No. 301, Punit Industrial Premises, Turbhe Naka,
    Mumbai - 400705, Maharashtra, India

    Send Enquiry

    8373903762 

  • Model pHCal5 Two Point Calibration
  • Model pHCal5 Two Point Calibration

    Supplied with Combination Glass pH Electrode (0-70ºC), Standard Buffer Tablets, Temperature Probe, Electrode Stand with Clamp, Dust Cover, DC Adaptor, Operational & Instruction Manual,Manufacturer Test Certificate & Warranty Card.Sailent Features
    * Auto Buffer Recognition & Simultaneous Display of pH, mV & Temperature, Auto / Manual Temp. Compensation etc.
    Technical Specification pH Range -1.00 to 15.00 pH more...

    11yr Analab Scientific Instruments Private Limited, Vadodara

    Plot No. 361, Sayajimarket, N. H. - 8 By - Pass At & Post - Sayajipura,
    Vadodara - 390019, Gujarat, India

    Send Enquiry

    9953352753 

  • Thermal Calibrators
  • Thermal Calibrators

    We are supplying thermal calibration system, thermal calibration equipment. State-of-the-art technologies based calibrators meet or exceed the international quality standards. The features of these calibrators include:
    Far superior accuracy Measurement data recording Quick connect terminals Laboratory grade accuracy Simultaneous measurement and generation
    Advantages File Menu - users can save up to 10 full configurations of the instruments and recall them as desired. Contrast more...

    12yr I Adept Marketing, New Delhi

    S- 49 To 51, 2nd Floor, Manish Global Mall, Sector No. 22, Dwarka ,
    New Delhi - 110077, Delhi, India

    Send Enquiry

    8447523795 

  • Calibrator
  • Calibrator

    Universal Portable Calibrator
    * 3 operational modes - measure, source or simultaneous
    * 4 - 8 hours of operation on a single charge
    * Extremely high accuracy - 0.02 % of Full-Scale value
    * Direct display in Celsius or Fahrenheit of thermocouple and RTD inputs
    * Automatic and manual cold-junction compensation for thermocouples
    * Lightweight (1.5 kg) and Compact (220 x 80 x 220 mm)
    * High resolution: 0.1 °C or °F, 10 µV, 1 µA, 0.02 more...

    12yr Radix Electrosystems Private Limited, Mumbai

    B-17, 1st Floor, Ghanshyam Industrial Estate, Off Veera Desai Road, Andheri West,
    Mumbai - 400053, Maharashtra, India

    Send Enquiry

    8377801970 

  • Zero Calibration Kit
  • Zero Calibration Kit

    The Zero Calibration Kit provides a fast and cost-effective method for calibration. The unit produces carbon dioxide free air from ambient air. The hand held Zero Calibration Kit includes all the necessary components for calibration of any SenseAir® CO2 sensor. The kit consists of a carrying case including charger and replacement cartridges. The indicators on the unit advice when to charge and replace the CO2 absorbent cartridge. more...

    8yr Jupiter Integrated Sensor System Private Limited, Mumbai

    Kailash Industrial Complex, A - 401, Behind Godrej Colony, Park Site, Vikhroli,
    Mumbai - 400079, Maharashtra, India

    Send Enquiry

    8447556760 

  • Ultima Controller
  • Ultima Controller

    The Ultima Controller is purpose-designed and built to provide complete access to all advanced features of the Ultima and Ultima X Gas Monitors, as well as the Toxgard II Gas Monitor. Via its full-function and password-protected keypad, users can set the real time clock, set alarm levels, change span-gas values, display date of last calibration, display minimum, maximum and average gas values, change address and set future calibration time/date in addition to providing basic calibration more...

    5yr Secure Plus Allied Private Limited, Thane

    B-3, Devendra Apartment Basement Sahyog Mandir Road, Ghantali, Naupada, Thane West,
    Thane - 400602, Maharashtra, India

    Send Enquiry

    8586924664 

  • Angle Beam Block (IIW V-2 Block)
  • Angle Beam Block (IIW V-2 Block)

    * Specified hole diameter
    * Small Calibration block for site checking of shear wave probes, time base and gain. 1.5mm or 5 mm diameter hole target
    * Steel 12.5X43X75mm
    * BS 2704IOW (Institute of Welding)
    more...

    6yr Radent Engineering, Chennai

    New No. 198, Old No. 161, Angappa Naicken Street,
    Chennai - 600001, Tamil Nadu, India

    Send Enquiry

    8588837872 

  • Dial Indicator Equipment
  • Dial Indicator Equipment

    Our organization hold expertise in offering high in quality Dial Indicator Equipment to customers sprawled across the globe. These equipment are used as a holding device for dial indicators. Our range of offered equipment is able to fit the needs of patrons, to ensure the same, we base it on latest technology and manufacture using high grade raw material for the manufacturing process. Owing to our efforts offered range has following features:
    Features: more...

    3yr Galaxy Engineering Works, Ahmedabad, Ahmedabad

    No. 1, G. F, Jila Panchayat Building, Lal Darwaja ,
    Ahmedabad - 380001, Gujarat, India

    Send Enquiry

    8376808192 

  • Pistonphones & Calibration Equipments
  • Pistonphones & Calibration Equipments

    Calibration is an essential step in every precision measurement. It establishes the relationship between the sound pressure and the electrical output of the microphone. Calibration can be performed at either 250 Hz or at 1 kHz. Both frequencies have their advantages and disadvantages.
    Application Used for calibration of microphones and microphone pairs more...

    13yr Aimil Ltd., New Delhi

    Naimex House, A- 8, Mohan Cooperative Industrial Estate Mathura Road,
    New Delhi - 110044, Delhi, India

    Send Enquiry

    8588872300 

  • Calibration Equipment
  • Calibration Equipment

    GILIBRATOR-2® Diagnostic Calibration System
    Primary standard accuracy and performance validation for sampling pump air flows
    from 1 cc to 30 LPM
    Specifications:
    Low Flow Wet Cell -
    Dimensions: 2”W x 4”H x 2.1”D (51W x 102H x 53mmD) Weight: 0.4 lbs. (.18 kg)
    Standard Flow Wet Cell -
    Dimensions: 2.5"W x 6"H x 2.6"D (64W x 152H x 66mmD) Weight: 0.82 lbs. (0.37 kg)
    High Flow more...

    13yr Instrumex, Mumbai

    No. 106, Ashish Udyog Bhavan, Opposite S. N. D. T. College, Liberty Garden Road, Malad West,
    Mumbai - 400064, Maharashtra, India

    Send Enquiry

    8447572180 

  • Multi Function Process Calibrator
  • Multi Function Process Calibrator

    In order to meet the assorted demands of respectable clients, we are able to deliver Multi Function Process Calibrator. The offered range of multi function process calibrators is designed & developed utilizing optimum grade material, which is sourced from trusted vendors of the market. Along with this, the offered range of is known for calibrating digital multi meters, digital panel meters, clamp on meters and analog panel meters.
    Features: more...

    11yr Source1 Instruments, Vapi

    Plot No. 2705/11, 3rd Phase, G.I.D.C.. ,
    Vapi - 396195, Gujarat, India

    Send Enquiry

    8447536934 

  • Table Top Calibrator
  • Table Top Calibrator

    We are engaged in offering a wide range of Table Top Calibrator. These products are manufactured in compliance with various industrial standards. Apart from this, the offered calibrator can also be availed by clients from us at industry leading prices.
    Features:
    * High demand
    * Quality tested
    * Affordable
    more...

    8yr Anadig Systems, Mumbai

    B - 214, Shreyas Industrial Estate, Near Jay Coach, Goregaon East ,
    Mumbai - 400063, Maharashtra, India

    Send Enquiry

    8588873259 

  • Calibrators
  • Calibrators

    We offer calibrators which are in accordance with the prevalent industry standards. These calibrators are designed for unmatched performance and are also used for loop power measurement. The better functionality of our products is ensured as the entire range is handy, light weight and portable. It is further enhanced by the presence of potentiometer free digital setting for ease of use. The range offers a display facility in value and percent. Powered by rechargeable battery, the products are more...

    5yr Automate Process Control, Mumbai

    No. 409, Reena Complex, Nathani Road, Near Railway Station, Vidyavihar West,
    Mumbai - 400086, Maharashtra, India

    Send Enquiry

    8376809538 

  • Signal Calibrator
  • Signal Calibrator

    Backed by our vast domain experience of supplying a premium assortment of Electrical Calibrators, we are offering Signal Calibrator to our patrons. It is designed for multipurpose use and facilitate checking and calibration of test as well as process equipments. These are ideal to be used in laboratories as well as in the field since these are compact and easy to carry. Our valued clients can avail these at reasonable rates.
    Features:
    * Easy to use
    * Sturdy more...

    6yr Barani Instruments Service Centre, Chennai

    No. 164, Singapore Plaza, First Floor, Linghi Chetty Street, Parrys,
    Chennai - 600001, Tamil Nadu, India

    Send Enquiry

    8377805219 

  • Calibration Equipment
  • Calibration Equipment

    We are one of the best Calibration service providers for Calibration Equipment Calibration. we are expert for service of Calibration Equipment. we also supply the Calibration Equipment with calibration certificate. we are provide the on site calibration all over india.we will give the calibration report immediate for after completion of calibration.
    Features:
    * We are doing calibration service for full range of more...

    12yr Arrow Instruments Calibration, Coimbatore

    6/875, Lakshmi Nagar, Near Government School Thoppampatti,
    Coimbatore - 641017, Tamil Nadu, India

    Send Enquiry

    8373902633 

  • Dry Block Temperature Calibrators
  • Dry Block Temperature Calibrators

    We stand amongst the market leaders and are engaged in manufacturing a wide range of Dry Block Temperature Calibrators. These dry block temperature calibrators are used in various industries for a precised verification of thermometer accuracy at the temperature point which is important to the user’s actual application.
    Specifications :
    * Model : ATC 600
    * Range : Ambient to 600°C
    * Stability : ± 0.5°C
    Further, to more...

    8yr Aparajit Instruments, Chennai

    Old No. 8, New No. 14, Govindappa Naicker, 2nd Cross Street, Alapakkam, Porur,
    Chennai - 600116, Tamil Nadu, India

    Send Enquiry

    8588873247 

  • Digital Sound Calibrator
  • Digital Sound Calibrator

    Digital Sound Calibrator ND-9
    Specifications:
    * Model suffix: 94dB
    * Output sound level: 114 dB
    * Accuracy: 0.5 dB, 0.3 dB(ND9B)
    * Frequency: 1000Hz
    * Design for: 1", 1/2"
    * Standard: GB/T15173, ANSI S1, 40, CLASS2, LEC942
    * Power supply: 1x9V 6F22 battery
    * Dimension: 142x47x47mm
    * Weight: 275g (not including battery)
    * Standard delivery: Carrying case, Instruction manual: 1
    more...

    8yr Bright Medi- Weld Appliances, Mumbai

    Old Anjirwadi, Ganesh Mandir Trust Lane, Rubber X Compound, Opposite Hasanabad Near Dhobi Ghat, Mazagaon,
    Mumbai - 400010, Maharashtra, India

    Send Enquiry

    8373903824 

  • Lutron SC-941 Sound Calibrator
  • Lutron SC-941 Sound Calibrator

    Features:
    * Use to calibrate the " Sound Level meter " precisely.
    * 1000 Hz frequency .
    * 94 dB Sound Pressure Level
    * Suitable for 0.5 & 1 inch microphone.
    * Total harmonic distortion : 2 %.
    * According IEC942, Class 2 Standard
    * Power by 006P DC 9V battery, 2 PCs.
    * Durable bench type housing case.
    * Built-in over input protection.
    more...

    9yr B. S. K. Technologies, Secunderabad

    No. 5 - 4 - 187 / 3 & 4 / 10, Patel Trade World, Karbala Maidan, Behind Hotel Moksh, M. G. Road,
    Secunderabad - 500003, Andhra Pradesh, India

    Send Enquiry

    8373902635 

  • Calibrated Loop
  • Calibrated Loop

    We provide all types of Calibrated Loop. he instrument calibration loop is used to perform three distinct functions. Firstly, it is used to characterize the instrument transfer function during the measurement modes. Secondly, it is used to characterize individual T/R modules. Finally, it is used in the special external characterization mode.
    Features:
    * High efficiency
    * Low Maintenance
    * High Performance
    more...

    7yr CENTURION SCIENTIFIC, New Delhi

    CFF-8, Jumbo House, Dr. Jha Marg, Okhala Industrial Area, Phase-3,
    New Delhi - 110 020, Delhi, India

    Send Enquiry

    9953355872 





Latest Indian Tenders








Indiamart

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.