We supply, distribute, trade this Garage Flooring Epoxy Coatings to Chennai, Tamil Nadu, Kerla, Andhra Pradesh, Karnataka all states of India.
Epoxy Coatings 1mm thickness Procedures:
* Laying of Epoxy Primer SF 93EC
* Laying of SF 261H or equivalent
* Laying thickness is 1mm(1000 microns)
Epoxy Coating 2mm thickness Procedures:
* Laying of Epoxy Primer SF 93EC
* Laying of SF 261H or more...
SMAC® EPOTOP SLF-SF is a three component solvent free Epoxy Self level Flooring System, which forms a tough, hard and joint-less mirror like finish which is seamless, dustproof and easy to clean hygienic surface treatment. It is a high build Epoxy Flooring with coloured finish.
• Eco-friendly, being solvent-less composition with 100% solids
• Excellent self leveling properties
• Can be applied on fresh as well as old more...
We manufacture high grade water based epoxy coating for wet surfaces. Our range of water based epoxy coating is in huge demand in India. The range is available at reasonable rates and along with customization facility, which is done absolutely free of cost. It is one of the best selling products of our company.
* Highly applicable for wet surfaces
* Used without primer
For More Detail Refer To more...
We have been counted among one of the top manufacturers, suppliers and exporters, as we present a wide variety range of Epoxy Based Joint Filler to our esteemed clients. These are used for filling joints between acid proof tiles in the industrial floors. Our products are available in market at most affordable rate. Our range of these products is chemical resistant and water proof.
* High more...
Epoxy coating is a High Strength covering that is applied to the surface of an object, usually referred to as the substrate. In many cases coatings are applied to improve surface properties of the substrate, such as appearance, adhesion, weather ability, rust and corrosion resistance, wear resistance, scratch resistance, resistance to acids, alkalis & solvents. In today’s scenario epoxy coating plays a vital role, as the coating has adhesion with almost all type of more...
Conpro EP-2-In Epoxy
Conpro EP-2 is a low viscosity, epoxy based, solvent free two component primer and coating system. In cured condition, Conpro EP-2 is a hard, tough and abrasion resistant material. It is resistant to a wide range of chemicals including many acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Due to its low viscosity it is suitable for crack filling.
Scope of use:
Conpro EP-2 is used: more...
We offer wide range of Mounded Bullets & Tankfarms Coatings.
Our range covers High Build Epoxy and Urethane coatings to service long duration performance periods in industrial and offshore environment.
Our range is appreciated owing to the following features:
* Superior corrosion resistance
* Preventive maintenance free performance during designed service period.
The Surface Tolerant Epoxy Coatings are best suited for floor and wall surfaces. It helps in creating a healthy, congenial and dust free work environment. These coatings not only prevent the concrete from chemical corrosion but also provide an excellent anti abrasive and water proof finish to the applied area.
Characteristics of Surface Tolerant Epoxy Coatings
* Protects your concrete from wear, making it last longer
* Controls concrete dusting
* Easy wash more...
We are manufacturer and supplier of FBE coating. Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating. FBE coatings are thermoset polymer coatings. They come under the category of 'protective coatings' in paints and coating nomenclature. more...
Additive 4194 :
The Epoxy Air Release Agent is a blend of surfactant in ketonic solvent perfectly that is appropriate as air release agent for solvent system specially epoxies.
Shelf Life : 1 Year
Technical Data : Appearance Clear Colorless Liquid Odour Faint Pleasant Odour more...
We are instrumental in offering optimum quality Epoxy High Performance Resin Coating to our valuable customers. Owing to their long lasting effect and accurate composition, these resin coatings are highly demanded. With our wide and well-connected distribution network, these resin coatings are delivered within the assured time frame at the customers’ end.
* Compositional accuracy
* Optimum effectiveness
* Longer shelf life more...
We offer to our clients a high quality of Epoxy Resin which have a very low viscosity level and they are used for providing adhesiveness. They are used for giving a high glossy finishing to the clocks and other products. These resins are used for filling up the various gaps which might be present on the marble flooring. The product is available at very reason able prices in the market and they have a very long shelf life.
* High adhesiveness more...
Epoxy Coatings create a healthy, congenial and dust free work environment.
Epoxy Flooring help protect industrial floors against further damage and degeneration due to abrasion, chemical corrosion and wear and tear especially due to vehicular loads.
Only the best quality Epoxy Resin, Fillers and Curing Agents are used, which are applied by a team of skilled applicators.
1.) Helps improve the physical & mechanical properties of the floor more...
We are one of the renowned manufacturers and suppliers of Ploymer Coating.Polymer Coating made by us is widely demanded by the customers within and beyond the country line. Our infrastructure is efficiently equipped with all requisite facilities and enables us to carry bulk production in timely manner. With the help of our vast network of distribution, we ensure timely deliveries at the clients end within promised time frame.
Benefits and Features : more...
Stanvac Group is a well known manufacturer, exporter, and supplier of High Build Solvent Free Epoxy Coating. Offered with supreme self leveling property and solvent-less composition, these epoxy coatings are vastly used in various automobile, pharmaceutical, and chemical industries. These solvent free coatings are highly resistant to chemicals and oil spillages.
* Excellent self leveling properties
* Eco-friendly, being solvent-less more...
Modern environments require innovation and choice. Colour, texture depth and emotion are the inspirations behind modern interiors. In Epoxy flooring we can provide you different colours, designs glossy as well as in matt finish which will give a pleasant look to your floor which will be joint less.
Our company is engaged in offering a comprehensive range of Epigen 0806 Epoxy Coating.
* A two component, brush able compound containing fine ceramic particles to combat abrasive conditions in a broad range of applications
* The epoxy resin base provides additional benefits in the form of superior adhesive strength, high corrosive resistance and excellent mechanical properties and adhering strongly to suitably treat metal, concrete and other more...
KemOxy 315 HB is a two-pack specially formulated epoxy coal tar polyamide based high performance coating for use in highly corrosive protective system. It protects MS structure, Concrete surfaces from highly corrosive environments.
* Suitable for use in both new structure and as an overcoat in industrial maintenance.
* It can be used in a wide variety of environments including offshore structures, petrochemical & chemical more...
Epoxy and polyepoxide is a commonly used polymer that is used widely in construction as well as allied industries. We offer customers epoxy coatings that find need in the protection of precious floors and surfaces. In the range of commercial epoxy coatings offered, we provide heat resistant coatings, floor epoxy coating and residential epoxy coatings. These epoxy coatings are also extensively recognized for their adhesive as well as chemical properties. Showing high resistance to heat & more...
Recommended System Mixing Ratio Weight
Epoxy Resin: EP – 182 100
Hardener : EH - 306 100
Radial Gats, Penstocks in Dams, Concrete & M.S. Structure of Bridge, Oil Jetty, Ports, Ships, Pipe Coatings, Storage Silos & General Corrosion Protection of Structures against Saline more...
We are one of the prominent manufacturers and suppliers of Industrial Epoxy. It is widely used in industrial segments like industrial sheds, go downs and warehouses for filling of tiles or stones. Manufactured using high quality materials, these are often used where high chemical resistance, high strength, impact resistance or heat resistance is required. Industrial Epoxy is washable grouting system with sold epoxy mortar and often used where chemical resistance is more...
Epoxy flooring and epoxy coating, polyurethane flooring / coating are used to on floor and wall surface. It gives higher abrasion resistant to surface. It is very easy to clean and wash.
» Provides Cleaner, healthier, more pleasant place for your employees
To work in.
» Protects your concrete from wear, making it last longer.
» Controls concrete dusting.
» Easy wash more...
We offer a wide range of sona koya steerling ltd epoxy coating that is widely used in manufacturing industry, engineering industry, shopping malls and big hotels. Our range of product is in great demand because of following features: Abrasion resistant Fine finish. Our range of epoxy flooring is also available in various colors as per the specification of clients.
* Abrasion resistant
* Fine finish
We have all range of Jotun Protective Coatings products have all been designed and formulated to fulfil certain aims. Every product is the result of intensive research and development combining state-of-the-art technology with innovative thinking, practical knowledge, and experience. We are a leading supplier of high performance coatings. Specialities are corrosion protection and passive fire protection of steel as well as protection and decoration of concrete.
Used for fixing RPM / Cat Eyes on Road or Floors & also for fixing Speed Breaker, spring Post, Corner Guard etc. more...
MIPRO-EC Solvent Free Epoxy Coating.
MIPRO-EC is a durable solvent free and easy apply epoxy resin coating. When cured, it forms a gloss, seamless and impervious finish which is easily cleaned. Available in a wide range of colors and in clear.
* Hygienic - seamless and hygienic finish, no crevices where dirt and bacteria can dwell.
* Hard wearing - good abrasion resistance for semi heavy mechanical loads.
* Excellent more...
Colourtech offers Epoxy Pigments that are stable dispersion of Dry Organic, Inorganic Pigment Powders in a saturated Polymeric Plasticizer. They are used for coloring epoxy resins hardener systems for all epoxy based applications. Epoxies are known for their excellent adhesion, heat resistance, chemical resistance, excellent mechanical properties, and very good electrical insulating properties.
100% solid epoxy modified with coal tar
CLEAN TECH EP is a two component Solvent-free Pitch modified Epoxy-polyamidoamine coating, with high degree of resistance to attack by aqueous chemicals and sea water. It is suitable for protection of metal and concrete surfaces, tanks, sewage treatment equipments, underground pipelines, concrete channels below ground pipe work and other construction materials in corrosive environment. It is having excellent resistant more...
We are one of the premier names in the industry that offers unmatched services for Floor Epoxy Coating. These services are performed by our experience personnel who have considerable expertise in this domain. Our personnel work in coordination with our clients to offer these services as per their specific requirements.
* Excellent Creative design
* Excellent Waterproof
* Holds Barrier Temperature
* Tested for Corrosion in Natural Sea more...
DTL fabricates load bodies and panels for commercial vehicles and is one of the leading suppliers to Auto mobile Industry with CED Process .
Maximum Componenet Size for one dip :- 5.5 Meteres x 2.5 Meters x 2.5 Meters
Maximum Weight :- 1 Ton
Capacity :- 10,000 To 15,000 Sq. Meter per Day of CED Coating .
Equiped with the PLC controled 3 Trasporters long term business proposal invited for CED process. more...
Latest Indian Tenders
Buyers Tool KitSend Buy Requirement
Suppliers Tool KitPost Products - FREE
Mobile Channel: Connect with us: