IndiaMART.com
or Post Buy Requirement

Top
Displaying products of 279 Suppliers

Plastic Molding Machines from India



  • Energy Saving Series Plastic Injeciton Molding Machines
  • Energy Saving Series Plastic Injeciton Molding Machines

    Overview A.) High volumetric efficiency is more than 95%.
    B.) Power consumption is 30% less than machines haying fixed displacement pump.
    C.) Cooling water requirement of hydraulic oil is between 1/3 and 1/2 of fixed pump requirement due to without extra hydraulic oil overflow. Therefore there is longer life for the seal of pump than fixed pump.
    D.) On the basis of proportional technology, the combination of electrical and sensor technology reaches the success of more...

    16yr Santec Exim Pvt Ltd., New Delhi

    Plot No. 93/3, Road No. 4, Mundka Udhyog Nagar, Mundka Extension ,
    New Delhi - 110041, Delhi, India

    Send Enquiry

    9953353277 

  • Plastic Injection Molding Machines
  • Plastic Injection Molding Machines

    The key issue in Plastic Injection Molding Machines is the consistent shot speed, pressure, accurate and repeated clamping along with energy saving. Variable pumps and servo driven gear pumps are used in the machines to deliver saving of energy. Accordingly the machines are available in various categories.
    The key features
    * Better Precision
    * Faster Speed
    * Higher Productivity
    more...

    12yr Associated Technocrats Private Limited, Noida

    A - 72, Sector - 64 ,
    Noida - 201305, Uttar Pradesh, India

    Send Enquiry

    8376806779 

  • MPE-HTL-12-90 - Horizontal Injection Moulding Machines
  • MPE-HTL-12-90 - Horizontal Injection Moulding Machines

    We offer to our clients superior range of injection molding machine. Their superior geometric design helps it to achieve high plasticizing capacities. Further the efficient use of precision finished bushes with lubrication arrangement fitted in the moving platen ensures perfect alignment of the mold halves and also helps in the extension of expensive molds life.
    The technical specification of our injection molding machine are: more...

    9yr Modern Plastics & Equipments, Coimbatore

    No. 345/3, Kalkatti Thottam, Periyar Nagar Via, Ganapathy ,
    Coimbatore - 641006, Tamil Nadu, India

    Send Enquiry

    8588873195 

  • Plastic Processing Equipment
  • Plastic Processing Equipment

    We have gained immense expertise in delivering Plastic Processing Equipment to our clients. The offered range of plastic processing equipment is available in different designs, shapes and sizes to cater to the diverse requirements of esteemed clients. Along with this, the offered range of plastic processing equipment is suitably checked on number of characteristics such as performance, usage and maintenance to ensure its conformation with the benchmarks of quality.
    more...

    11yr Sant Engineering Industries, New Delhi

    No. 580, Main Faiz Road, Street No.17, Karol Bagh, ,
    New Delhi - 110005, Delhi, India

    Send Enquiry

    8376807976 

  • Open Fired Machine
  • Open Fired Machine

    Open Fired Machine is kept under a pit and rotates about 45 degree. The mould is put on the machine which rotates about 360 degree on its axis. It is heated by the gas burner lying in the centers. As the mould heated in open space hence there is heat loss. Therefore, this machine is most suitable for large size tanks. We produce this machine in the range of 5000 liters to 20000 liters capacity.

    10yr Piyush Rotomac, Mumbai

    Wagle Industrial Estate, A/127, Road No. 22, Thane West ,
    Mumbai - 400604, Maharashtra, India

    Send Enquiry

    8447509965 

  • Plastic Jerry Can Plant
  • Plastic Jerry Can Plant

    Plastic Jerry Can Plant
    In our jerrycan plants, we make use of high grade raw material and advanced production technology to deliver flawless functionality standards in the offered plants. These are able to fulfill the specific requirements of the clients. Also, these are suitable for filling cooking oil, water, chemical and various industrial purposes.
    Specification:
    * Jerrycan Mould Size: 1 Ltr to 60 ltr
    * Extrusion Plant: 50 mm To100 mm more...

    12yr Archana Extrusion Machinery Manufacturing, Ahmedabad, Ahmedabad

    No. 7, Kansawala Estate, Opposite Chakudiya Mahadev, Rakhial,
    Ahmedabad - 380 023, Gujarat, India

    Send Enquiry

    8447568960 

  • Moulding Machine
  • Moulding Machine

    Our plastic injection Moulding Machines have four variants, with different shot capacities, die clamping, injection force, heaters, motor, tank sizes and die sizes. Their drafting features allow easy assembly intent fixtures. The production process of these machines is monitored very carefully to make sure that the moulds are defect free, so that no discrepancy occurs when they are being used to manufacture the injections with desired specifications.
    more...

    7yr Esem Engineers, Ahmedabad

    No. 132/ 133, Rajdeep Industrial Estate, Near - B. B. Talav, Vatva ,
    Ahmedabad - 382 445, Gujarat, India

    Send Enquiry

    8447523811 

  • Standard Plastic Injection Moulding Machine
  • Standard Plastic Injection Moulding Machine

    We are the prominent shaper and supplier of wide array of Standard Plastic Injection Moulding Machine. Our unit stays in touch with the clients', while rendering these work to understand their essential precisely. We have a skilled and experienced team, which is equipped with essential knowledge of the domain. Owing to precise and reliable services extend by us at cost-effective prices, we are a extremely sought after formation.
    Features:
    * Reliable
    * more...

    4yr Kartar Hydraulic Industries, Ludhiana

    Plot No. B-244/4, Street No. 1, Maan Nagar, Amar Puri, Daba Road ,
    Ludhiana - 141003, Punjab, India

    Send Enquiry

    8588857316 

  • Plastic Injection Moulding Machine
  • Plastic Injection Moulding Machine

    We are offering our customers Plastic Injection Moulding Machine which are developed using optimum-grade components and other material that are procured from trusted vendors of the market. These offered machine are environment-friendly and conform to high standard of design and performance quality. more...

    6yr Techno Packaging Industries, Mumbai

    Shop No. 5, Mita, S. N. Road, Tambe Nagar, Mulund West,
    Mumbai - 400080, Maharashtra, India

    Send Enquiry

    8377800507 

  • Plastic Blow Molding Plant
  • Plastic Blow Molding Plant

    Our blow moulding plant comes with preloaded die as per the client requirement. And you can have option for extra die on demand. Conatct us for detailded quotation as per your requirement.
    Specification:
    * Jerrycan Mould Size: 1 Ltr to 60 ltr
    * Extrusion Plant: 50 mm To100 mm
    * Heating Control by temperature controller
    * Barrel Heating by Power saving heaters/Gas system
    * Heavy duty bearing housing with Helical/Worm Gear Box
    * Control more...

    12yr Archana Extrusion Machinery Manufacturing, Ahmedabad

    No. 7, Kansawala Estate, Opposite Chakudiya Mahadev, Rakhial,
    Ahmedabad - 380023, Gujarat, India

    Send Enquiry

    8447522472 

  • Semi Auto Blow Molding Machine
  • Semi Auto Blow Molding Machine

    Semi Auto Blow Molding Machine
    * Built in automatic microprocessor system to control entire operation
    * Memory storage and recall for up to 40 parameters settings
    * High quality cylinders and valves for long lasting life
    * Touch Screen LCD operator panel for easy Men – Machine interface
    * Heating section with 1120 mm long Infra red heaters and PMDC motor to control self rotation speed of perform for uniform and proper heating of perform before blowing
    * more...

    12yr Maruti Machines Pvt. Ltd., Ahmedabad

    Plot No: 95, Road No: 8, Opp. Water Tank G.I.D.C Kathwada,
    Ahmedabad - 382430, Gujarat, India

    Send Enquiry

    8447511348 

  • Microprocessor Controlled Injection Moulding Machine
  • Microprocessor Controlled Injection Moulding Machine

    We offering our clients with Microprocessor Based Screw Type Plastic Injection Moulding Machine. These Screw Type Plastic Injection Molding Machines consists of a large shot volume, low cutting and absolute driving. It also uses the mold with more cavities by leaving vast space between tie bar and full hydraulic double plate clamping unit. Twin Balance injection Cyl. Unit. Twin Five Point Clamping System. Auto Mould
    Height. Muliti Stage Selection Pressure & Speed. Electric Motor more...

    10yr Natraj Machine Manufacturers, Ahmedabad

    No. 14, Shivalik Estate, Near Shubh Estate, Zaveri Estate Compound Kathawada Gam Road,
    Ahmedabad - 382330, Gujarat, India

    Send Enquiry

    8447507014 

  • Vertical Cum Horizontal Plastic Moulding Machine
  • Vertical Cum Horizontal Plastic Moulding Machine

    Our ABS-VH series of Vertical Cum Horizontal Screw Type has high output capacity and with excellent product quality. It's compact structure is resistant to wear and corrosion. It helps in reducing raw material processing charge and also saves the time of the user. Some of its specifications are as follows :

    • Proven Screw geometry for optimum melt homogeneity.

    • Suck back after refill.

    • Direct screw drive through high torque variable speed more...

    13yr Amrut Brothers, Ahmedabad

    No. 24, Manorath Estate, Near Milan Cinema, Saraspur ,
    Ahmedabad - 380018, Gujarat, India

    Send Enquiry

    8373903386 

  • Pet Blowing machines
  • Pet Blowing machines

    Leveraging our vast industry expertise, we are engaged in offering Pet Blow Mould Machine to the clients. Our offered machinery is developed using premium grade basic materials that are procured from certified vendors of the market. Moreover, to ensure their flawless quality, they are strictly checked by our expert quality controllers.
    Features:
    * Perfect finish
    * Sturdy design
    * High tensile strength
    more...

    5yr Madan Lal Yadav & Sons (A Unit Of Madho Mechanical), Ambala

    12th Cross Road, Opposite Government Senior Secondary School HN/3214, Kacha Bazar,
    Ambala, Haryana, India

    Send Enquiry

    8586978293 

  • Pet Preform Molding Machine
  • Pet Preform Molding Machine

    we are leading manufacturers of pet line injection moulding machine . Petline Application Mineral Water Bottles
    Wide Mouth Jar
    Cosmetics Bottle
    Pharma Bottles Distilled Bottles more...

    7yr Natraj Industries, Ahmedabad

    Plot No. 564, Kathwada G I.D.C. Opposite Road No. 10, Near Tribhuvan Estate Gate, Phase- 2, Kathwada, Tal- Daskroi,
    Ahmedabad - 382430, Gujarat, India

    Send Enquiry

    8373904899 

  • Injection Moulding Machines
  • Injection Moulding Machines

    Offered by us is a range of highly efficient Injection Moulding Machines used to create a variety of plastics instruments like hearing aids, surgical tools, corrective eye surgery, orthodontics and high-end electrical devices. Technically advanced range of these machines is precisely engineered by the smart manufacturers of the industry.
    Other Information
    * Delivery Time: 3 Months
    * Port of Dispatch: more...

    4yr Y & V Trading Company, Ghaziabad

    C-10-A, Ground Floor, Parsav Nath Paradise, Mohan Nagar ,
    Ghaziabad - 201007, Uttar Pradesh, India

    Send Enquiry

    8373904284 

  • Two Arm Biaxial Machines
  • Two Arm Biaxial Machines

    Available with us is a gamut of a complete automatic work Cycle Control System called Two Arm Biaxial Machines that is operated through pc / plc. The various factors of the work cycle such as visualizing the temperature trends, timing of moulding, handling production procedures are controlled by the command peripherals (Mouse and Keyboard). Provision for 3 or 4 Arm that will concurrently change station to station, alternating between different phases. Possibility of multiple more...

    9yr Shree Momai Rotocast Containers Pvt Ltd., Vadodara

    No. C-1- 821 & 822, G. I. D. C., Waghodia I. N. A., Waghodia,
    Vadodara - 391 760, Gujarat, India

    Send Enquiry

    8373903323 

  • Plastic Machine
  • Plastic Machine

    We are engrossed in the manufacturing and supplying of an utmost quality Plastic Machine at customers' premises. The offered range of plastic machines is suitably inspected on varied characteristics to ensure that flawless products are delivered at clients' premises. The offered range of plastic machines is developed by dependable vendors, who ensure to utilize high grade raw material and innovative techniques in complete adherence.
    Features:
    * Robust more...

    8yr Farmtech Industries, Ahmedabad

    No. 4, Nilkanth Industrial Estate, Memco- Bapunagar Road, Bapu Nagar,
    Ahmedabad - 380025, Gujarat, India

    Send Enquiry

    8377804971 

  • Plastic Injection Moulding Machine
  • Plastic Injection Moulding Machine

    Plastic Injection Moulding Machine, Auxilliary Equipment & Spears
    We are widely recognized for effective repairing services rendered by us for various injection moulding machines. For the purpose, we have a skilled and experienced team, which is equipped with requisite knowledge of the domain. Our team stays in touch with the clients', while rendering these services to understand their requirements precisely. Owing to accurate and reliable services offered by us at cost-effective prices, more...

    4yr Rohan Sales & Service Corporation, Pune

    A / P - Shikrapur, Gate No. 1350, H. No. 3570, Chakan Chowk Behind Indraprastha Garden, Tal Shirur,
    Pune - 412208, Maharashtra, India

    Send Enquiry

    8377809254 

  • Plastic Injection Moulding Machine
  • Plastic Injection Moulding Machine

    We are engaged in offering a superior range of Plastic Injection Moulding Machine to the clients. Our offered machine is manufactured from a high grade materials and employing latest technology. Our offered machine is widely used in molding applications. Moreover, these are available with us in different specifications.
    Features:
    * Longer service life
    * Smooth finishing
    * Easy to install
    Specifications:
    Injection more...

    3yr Marck Hydraulics, Ahmedabad

    No. 2, Harshad Industrial Estate, Marga Farm Compound Near Virat Nagar, Cross Road, N. H. No. 8, Bapunagar,
    Ahmedabad - 380024, Gujarat, India

    Send Enquiry

    9953360880 

  • Injection Moulding Machine
  • Injection Moulding Machine

    Plastic Injection Moulding Machine
    Owing to our expertise in the domain, we have been able to offer Plastic Injection Moulding Machines. These machines are widely demanded to be used in various industries such as automobile, power plant, steel, extrusion and various others. We fabricate these machines as per the application requirements of our esteemed patrons.
    Features:
    * Resistant to more...

    4yr Shaligram Engineers, Ahmedabad

    No. 34, Mahalaxmi Estate, Opposite Gas Godwan, Near Cadila Crossing, G.I.D.C., Vatva Road,
    Ahmedabad - 382445, Gujarat, India

    Send Enquiry

    9953357655 





Latest Indian Tenders


B2B Newsletter Subscription

Subscribe to Rubber & Plastic Industry Newsletter and get updates on latest industry news, tenders, trade fairs, catalogs and much more.








Indiamart

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.