Air Entraining Agent - Manufacturer

ADBEEL FA-04 is a liquid foaming agent for use in all types of mortar and concrete mixes. It is particularly designed for use in the production of foamed concrete and for use with synthetic and naturally occurring light-weight aggregates where the density of the fine aggregate/cement paste is normally required to be similar to that of the aggregate. ADBEEL FA-04 is formulated from carefully selected raw materials and is manufactured under controlled conditions to give consistent product. It is a blend of anionic surfactants. ADVANTAGES ADBEEL FA-04 will entrain air into all types of concrete even those with highly angular crushed aggregates. It can be used with all types of light weight aggregates to produce very low density concrete mixes. ADBEEL FA-04 can be employed to entrain air in mixes containing high proportions of pulverised fuel ash. An aqueous solution of ADBEEL FA-04 can be performed to give a very stable foam for use in the production of foamed concrete.

We are among the eminent names in industry, involved in offering high grade Air Entraining Admixture. In order to maintain the quality and reliability of the products, we process them in adherence with the international quality standards through latest mechanism. Under the able-support of our experts, we are able to offer the best. quality products in market and deliver them within the prescribed time span. Features: Easy to use Quality approved Long shelf life Applications area: Air En-training Admixture is specially suitable for preparation of concrete and plaster and masonry mortars to be used in marine atmospheres and in marine construction. It can be effectively used as an admixture for concrete prepared at site. Ready mix concrete and light aggregates concrete. Air En-training Admixture is particularly suited for per- cast industry.

 Provides freeze thaw resistance to concrete.  Imparts cohesion to supplementary slags are used in mixes.  Controlled micro bubbles.  Reduces thermal shrinkage.  Least strength reduction.

Entrained Air bubbles which are spherical and evenly spaced out offer crack free resistance to concrete along with waterproofing and workability characteristics.

DURASPRED AEA is a dark brown liquid based on polymeric resin. It produces microscopic airbubbles evenly distributed throughout the concrete.Standards :Conforms to IS : 9103-1979 and ASTM C 260Uses :It is most suitable for concrete for Concrete Runways and Bridges, Canal linings, Dam reservoir, Tunnel linings etc.Features :* Increased durability : Resistant to attack by frost and deicing salts, thermalmovent. Crack free concrete.* Increased cohesion : Increased pumpability with lean mixes. The concrete intransit will show no segregration.* High workability : Around 5 to 9% water reduction is possible. Impartsworkability retention.* Less vibrating effort through the ball bearing action of the air bubbles.* Most economical, as it increases the yield of concrete by the percentage of air entrained.* Reliability produced under strict quality control system, quality shall never vary.* Improves impermeability.Application :DURASPRED AEA should be added along with gauging water. The quantity of air entrained will varywith respect to the proportion of sand and the plasticity of the concrete mix. A site trial is alwaysadvisable for the entrained air content with an air meter and accordingly dosage is adjusted to keep the air content within required limit. Approved mix design of concrete with air entraining agent should be followed.Dosage :The dosage of DURASPRED AEA will vary according to mix design and aggregate grading. But as aguide line, dosage = 15-60 ml per 50 kg cement. This additioin rate will have to be increased, if more fine material like more cement or Fly Ash is used in the concrete.

Air Entraining Agents

Powder Type Air Entraining Agent

Air Entraining

Air entraining agent for high-slump concrete.Improves the workability of the concrete avoiding bleeding segregation increases resistance to deicing salt.

AQUOLAC A.E.A. is Chloride free Air Entraining Agent for normal and lightweight aggregate concrete. It is used to improve the workability, plasticity and cohesiveness of concrete mixes. It resists freezing and thawing cycles by the entrainment of innumerable minutes air bubbles of suitable size and spacing which are evenly distributed throughout the mix. The effectiveness of entrained air in producing concrete has been recognised particularly in road and runways. AQUOLAC A.E.A. is formulates from carefully selected rawmaterials and is produced under controlled conditions to give a consistent product.

Air Entraining Admixture

Vinapor AE 3914 F

Air- Entraining Plasticisers

AT-PLAST (AEA) is a ready-to-use airentraining admixture for concrete.