| Brand | ResMed |
| Model | Lumis 150 |
| Usage/Application | Hospitals & Personal Use |
| Operating Mode | CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional AutoEPAP |
| Pressure Range (cm H2O) | 2–25 cm H2O (2–25 hPa) in S, T, ST, PAC and iVAPS modes, 4–20 cm H2O (4–20 hPa) in CPAP mode |
| Sound/Noise Level (db) | 26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode) |













| Brand | ResMed |
| Model | Lumis 150 |
| Usage/Application | Hospitals & Personal Use |
| Pressure Range (cm H2O) | 2–25 cm H2O (2–25 hPa) in S, T, ST, PAC and iVAPS modes, 4–20 cm H2O (4–20 hPa) in CPAP mode |
| Sound/Noise Level (db) | 26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode) |
| Dimensions | 116 mm x 205 mm x 150 mm (Device only), 116 mm x 255 mm x 150 mm (Device with HumidAir humidifier) |
| Weight Without Humidifier | 1106 g |
| Weight With Humidifier | 1268 g |
| Operating Temperature | +5°C to +35°C |
| Operating Altitude | Sea level to 2,591 m, Air pressure range 1013 hPa to 738 hPa |
| Operating Mode | CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional AutoEPAP |
| 90 W Power Supply Unit | Input range: 100–240 V, 50-60 Hz, 57 VA (typical power consumption) 108 VA (peak power consumption) |
| Housing Construction | Flame retardant engineering thermoplastic |
| Supplemental Oxygen | Recommended maximum flow: 15 L/min (CPAP, S, T, ST, PAC); 4 L/min (iVAPS) |
| Standard Air Filter | Polyester non-woven fibre |
| Tubing | SlimLine and ClimateLineAir (15 mm); Standard (19 mm) |
| Air Outlet | 22 mm air outlet complies with ISO 5356-1:2004 |
| Classification | IEC 60601-1: 2006: Class II (double insulation), Type BF Ingress protection IP22 |
| Operating Humidity | 10–95% relative humidity, non-condensing |
| Storage and Transport Temperature | -20°C to +60°C |
| Storage and Transport Humidity | 5–95% relative humidity, non-condensing |
Lumis 150 VPAP ST is a non invasive ventilator designed for non-dependent patients with obstructive or restrictive respiratory conditions.
Featuring ResMed’s unique volume-assurance mode – iVAPS (intelligent Volume-Assured Pressure Support) – Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient’s changing needs. And with an intelligent Backup Rate (iBR) and optional AutoEPAP, iVAPS continuously monitors ventilation and the upper airway.
The ventilator is easy to set up and use, and is supported by ResMed’s ResScan patient management software.
TiControl lets you set min and max limits on either side of the patient’s ideal inspiratory time to encourage spontaneous breathing.



Have a requirement?
Chat with us